COVID-19 UPDATE: Expect 2-3 day preparation time for most orders. EPS Blanks are currently 3 week manufacturing lead time.

FCS / FACTORY Fin Plug Quick Set Install Jig

Product image 1FCS / FACTORY Fin Plug Quick Set Install Jig
Product image 2FCS / FACTORY Fin Plug Quick Set Install Jig

Regular price $ 1.83

FCS / FACTORY Fin Plug Quick Set Install Jig

Peel and stick foam holesaw jig templates space your FCS X-2 or FACTORY fin plugs perfectly and guide your Plug Install Drill Bit when drilling. 

They also act as a resin dam to keep the overflow resin contained around the plugs when setting them with resin.

Designed for one time use.

Available for Rail and Center fin plug installation


Ask a Question
  • How deep do the holes need to be for the fin plug set? How much do I fill the holes with my resin mixture?

    Drill the hole 1/2" deep to install the FCS / FACTORY fin plugs. 

    Fill the hole about 1/3rd with resin and set the plugs in. Secure a fin or dummy fin in the plugs to set the correct spacing and cant angle.

    Tape the top of the fin to prevent the plugs from floating and have a reference to set the cant angle while the resin cures. 

    About an hour later come back an fill the rest of the hole with resin. Overfill a bit as the resin will drain deeper into the foam.

    It's best us use a 4 oz. resin mixing cup and pinch the top to make a pour spout to get the resin right in the space between the plug and hole.

Close (esc)


FREE SHIPPING on Orders over $35

**Excluding Surfboard Blanks but Shaping Kits ship for FREE too!

Age verification

By clicking enter you are verifying that you are old enough to consume alcohol.


Shopping Cart

Your cart is currently empty.
Shop now