Skip to content

I was wondering if I get the surfer mag epoxy kit, what are the bare necessity tools I need to shape my board.

We have a shaping tool kit package with a few more useful tools than the bare necessities but to shape and glass the board with epoxy resin the minimal tools needed are as follows:


Handsaw

Shaping Rasp or G-rasp

Wood block or shaping block

Tiger Shark Sand Paper

Trim plane for stringer

Sandshark Rail Sanding Screen


Squeegee

Mixing Buckets

Scissors

4" Hotcoat Brush (2X)

Masking Tape


Holesaw for fin plug and leash plug install (if using FCS X-2 plugs or Factory Fin Plugs)