Surfboard Glassing Razor Scraper / Cut Lap Tool
Surfboard Glassing Razor Scraper / Cut Lap Tool
Say goodbye to sanding your surfboards! Another Greenlight engineered tool for smarter surfboard building...
Maintain a high gloss epoxy finish and keep your board water tight. Don't sand it - SCRAPE IT! How many times have you sanded through the sealcoat and expose fiberglass weave, only to have to recoat the area and burn through again? Or kill a pin line by sanding through? Or try to clean up your workspace (and yourself) after sanding a surfboard? Not anymore...
Featuring a heavy duty super sharp carbon steel blade that provides 4 fresh corners for cut laps and 2 flat razor edges for scraping your sealcoat. Simply rotate the blade in the tool holder when it gets dull.
What you can do with this razor tool:
- Easily cut through CURED epoxy with 6 oz. fiberglass cloth laps. (because as DIY board builders we can't wait for perfect timing to cut the lap - just let is cure and cut it when you get around to it!)
Eliminate the need to sand your boards by scraping the parts that matter!
- Scrape the resin bead left on the rail from the tape when seal coating for a smooth rail
- Scrape and shape the resin built up in the tail from your tape dam and define your hard edge for water release
- Cut open and scrape pre-glass fin box installs to open up the pocket for the fin to go it (which is traditionally done when sanding the bottom of the board)
- Scrape cured fiberglass laps flush with the foam or previous lamination.
Includes tool and (1) heavy duty blade. Replacement razor blades available.
How to use the razor scraper / cut lap tool video: