Deck Vent for Stand Up Paddle Boards, Hollow Wood Surfboards, and EPS Foam Surfboards

SUP Deck Vent

Venting is a must for all EPS foam core SUPs and hollow wood boards.

Goretex-like venting fabric keeps the pressure inside the board equal to avoid damage and delamination.

Position this vent 1/3 the board length from the nose in conjunction with a Vented Leash Plug for optimal venting.

Installation of BARREL STYLE vents:

1. Drill 1 1/4" hole x 7/8" deep

2. Remove scew vent (13mm socket)

3. Mix 1/2 oz Epoxy Resin and fill hole 1/2 way

5. Set housing into hole and fill resin around the perimeter

6. After resin cures, drill 3/16" diameter hole through bottom of housing into SUP foam

7. Screw vent back into housing until secure

Choose Vent Plug with Base or Replacement Vent Screw

Need a replacement vent screw? There are different treads. Read this before purchasing.

Black Replacement Screws are M12 x 1.3 Fine Thread

White Replacement Screws are M12 x 1.5 Course Thread