Skip to content
We are Hiring! Click Here for Available Positions
We are Hiring! Click Here for Available Positions

Deck Vent for Stand Up Paddle Boards, Hollow Wood Surfboards, and EPS Foam Surfboards

by FACTORY
Original price $ 16.48 - Original price $ 19.98
Original price
$ 19.98
$ 16.48 - $ 19.98
Current price $ 19.98
Color: Black

SUP Deck Vent

Venting is a must for all EPS foam core SUPs and hollow wood boards.

Goretex-like venting fabric keeps the pressure inside the board equal to avoid damage and delamination.

Position this vent 1/3 the board length from the nose in conjunction with a Vented Leash Plug for optimal venting.

White vents are BARREL style and have an M12x1.5 thread

Black vents are FLANGE style and have an M12x1.3 thread

There is no big difference in black or white vents, just the installation process.

Installation of BARREL STYLE vents:

1. Drill 1 1/4" hole x 7/8" deep

2. Remove scew vent (13mm socket)

3. Mix 1/2 oz Epoxy Resin and fill hole 1/2 way

5. Set housing into hole and fill resin around the perimeter

6. After resin cures, drill 3/16" diameter hole through bottom of housing into SUP foam

7. Screw vent back into housing until secure

Installation of FLANGE STYLE vents:

1. Drill 1 1/4" hole x 1/8" deep, then drill a 1" hole x 1 1/16" deep in the center

2. Put masking tape on bottom of vent body so resin does not get in.

3. Remove scew vent (13mm socket)

4. Mix 1/2 oz Epoxy Resin and fill hole 1/2 way

5. Set housing into hole and fill resin around the perimeter

6. After resin cures, drill 3/16" diameter hole through bottom of housing into SUP foam

7. Screw vent back into housing until secure

Choose Vent Plug with Base or Replacement Vent Screw

 

Customer Reviews

No reviews yet Write a review