BRIGHT FAST FUSE Epoxy Resin System

BRIGHT FAST FUSE Epoxy Resin System

Greenlight Marine Grade Surfboard Epoxy Resin System is the result of over 15 years of epoxy resin usage and development focused on solving the common problems associated with using epoxy resin in less than optimal environments (a.k.a. your typical dusty DIY workspaces).

This BRIGHT formula makes white surfboards look whiter for longer with special optical additives (the purple hue).

FAST FUSE is our quickest curing epoxy resin for experienced glassers or if you're working in cooler temperatures (the lower the temp, the longer it takes any epoxy resin to cure). FAST FUSE epoxy resin an be used for laminating as well as seal coats as the quick curing time provides excellent surface finishes.

 Resin Features:

• Self Leveling
• High Surface Tension Tolerant of Small Dust Particles (greatly eliminates pinholes and fisheyes typical of epoxy sealcoats*)
• Integrated Bubble Releasing Agent
  
• High Gloss Finish
• Easy 2:1 Mix Ratio (100:45 by weight)
• Water Resistant for all Marine Applications
• U.V. Resistant
• Accepts Epoxy Pigments or Tints with no Discoloration
• 100% Solids (Very low V.O.C)
• Proudly Made in U.S.A

______________________________________________________________________________________________

SEALCOAT TIPS with Marine Grade Surfboard Epoxy Resin:

*Recommended sealcoat amount for surfboards is 3 oz. mixed resin per linear foot of board. For example, a 6'0" long surfboard would use 18 oz. mixed resin (6 x 3 oz.) for excellent results.

Also minimal brush strokes leads to a better finish. Brush it out once to cover the entire surface and walk away! The resin is designed to slowly self level as it cures leaving a nice, glossy surface.

______________________________________________________________________________________________

Why we use purple optical brightener in Greenlight Marine Grade Epoxy Resin

Epoxy and polyester resin can turn yellow or amber color for a few reasons, the most common being exposure to UV light. When UV light hits the resin, it breaks down the chemical bonds in the resin, which causes the resin to yellow. This process is called photodegradation.

Purple is a complementary color to yellow. This means that when purple is placed next to yellow, the two colors cancel each other out, making the yellow appear less yellow. This is why purple is often used in optical brighteners. The purple pigment in the brightener absorbs the yellow light that is reflected off of the surface, making the surface appear whiter.

In addition to making the resin appear whiter and brighter, the purple optical brightener in Greenlight Marine Grade Epoxy Resin also absorbs more UV light, which protects the resin and substrate from yellowing. 

Note: This resin looks really purple in the bottle and mixing bucket (in volume) but when applied in a thin coat (laminations and seal coats) it is clear with no visible purple hue - it looks bright white!

In addition, you can add epoxy tints and pigments to this resin with no change to the intended color. There is such a small amount of purple optical brightener it will not affect the pigment or tint color.

NOTE: The purple hue will show up on dark substrates such as carbon fiber or black painted boards. Also some purple will show in fiberglass laminations exceeding 2 layers as the resin builds up in the weave. Up to 2 layers of 6 oz. fiberglass can be laminated without noticeable change in hue. When in doubt use CLEAR Marine Grade Epoxy Surfboard Resin.

______________________________________________________________________________________________

Watch Andrew W's review of Greenlight Marine Grade Epoxy Resin:

Available in the following quantities:

6 oz. Kit (4 oz. Resin / 2 oz. Hardener)
48 oz. Kit (32 oz Resin / 16 oz. Hardener)
96 oz. Kit (64 oz. Resin / 32 oz. Hardener)
1.5 Gallon Kit (128 oz Resin / 64 oz. Hardener)
3 Gallon Kit (256 oz. Resin / 128 oz. Hardener)
6 Gallon Kit (512 oz. Resin / 256 oz. Hardener)

Download and Print our Greenlight Marine Grade Epoxy Resin Mix Ratio By Weight Chart for perfect mix ratios and optimal results. We recommend weighing the resin with an epoxy digital scale and use epoxy dispensing caps to nail the weight ratio.

SDS Sheet Download