Resin Research 2000CE ULTRA with SLOW Hardener
Resin Research 2000CE ULTRA Epoxy with FAST Hardener
Download Greenlight's Resin Amounts per Board Length Chart HERE
The Absolute Best Epoxy Resin System for Surfboards!
ULTRA resin includes UV stabilizers suitable for use with Polyurethane and EPS Foam
The resin has a blue optical brightener tint but is water clear in laminations and hotcoats
The balance of excellent color, UV stability, varying hardener speeds, easy mix ratios, extremely low vapor pressure, odorless, excellent chemical adhesion and high gloss finish make this resin system easy to use and an effective production contributor to everyone from the small craftsman to large scale producers.
Resin Modulus 2000
SLOW Hardener [50 min pot life, 5 hout cure time @ 77 F (25 C)]
Available in the following quantities:
96 oz. (complete shortboard)
1.5 Gal. (complete longboard with extra)
3 Gal. (complete SUP)
78 Gallon Drum Kit
SHIPPING NOTICE: Continental US and Canada shipping only. We cannot ship epoxy to Hawaii or Internationally. (But we're working on it!). Due to USPS constraints all resin shipment will be delivered by UPS regardless of shipping method requested at checkout.
For quantity orders of 18 gallons, 36 gallons, and Drums please contact us for custom shipping quote
DOWNLOAD THE RESIN RESEARCH MSDS SHEET HERE
We Also Recommend
QUESTIONS & ANSWERSAsk a Question
Does the blue tint in the Resin Research epoxy resin change the resin tint color on the board?
There is no issue adding resin tint to the 2000CE. It has a very slight blue optical enhancer that can only be seen in volume, as in the bottle or bucket. When in a thin layer it appears water clear and does not affect the color of the tint.
Whats the recomended Shelf-Life of the Resin and Hardener?
As long as the Resin Research epoxy is stored with the caps on tight the resin has an infinite shelf life. In cold temperatures the resin may become more viscous or even freeze solid. If this happens simply put the bottle in a hot bath and the resin will re-liquify and can be used.
I'm building a 12.5 ft flat water SUP (think 8 inch rails). Is the resin available with a slow hardener?
Yes we can provide SLOW hardener with the resin. Please put a note at checkout to include SLOW Hardener.
I\'m doing a cut lap. When do I cut the glass? Do I wait for the resin to fully cure?
You have to let the resin tack up to semi-solid before cutting the lap with a razor blade. A good test is to touch the resin on the board with your finger and if it's sticky but does not stick to your finger an pull a string of resin then it's ready to cut. You can also let the resin fully cure and cut through, it's just requires more force to cut through the solid cured resin. It's easier to cut when the epoxy is in a softer state.