QUESTIONS & ANSWERSAsk a Question
Does the blue tint in the Resin Research epoxy resin change the resin tint color on the board?
There is no issue adding resin tint to the Quik Kick Resin. It has a very slight blue optical enhancer that can only be seen in volume, as in the bottle or bucket. When in a thin layer it appears water clear and does not affect the color of the tint.
Would this be the better of the two resin research epoxies to use when glassing in colder temperatures?
Yes Resin Research Quik Kick epoxy cure faster and since epoxy cure time is temperature depandent we recommend Quik Kick in colder temps. You can also pre heat the resin in a warm bath to help it flow better and cure faster.
Am I correct that the optical brighteners in the epoxy resin alter the color of resin tints?
The optical brighteners in the Quik Kick Epoxy Resin to not affect resin tint colors. There is such a small amount you can only see the blue color when the resin is in volume. A thin lamination layer or hotcoat on a surfboard is clear and accepts resin tints and pigments as the true color.
The Epoxy resin mixing chart notes 2.2 : 1 ratio, though the bottles note 2:1, whats about the 2.2:1? Thanks
2:1 mix ratio is close enough for full epoxy cure and no math or highly sensitive measuring scale needed. You can use the 2.2:1 for critical composite strength applications for perfection.
Is it possible to lam with fast setting epoxy and hotcoat with qwick kick? Vice versa?
Yes, it is common to laminate with Resin Research 2000CE using fast or slow hardener and hotcoating with Quik Kick. Quik Kick is a bit thicker which make for a nice hotcoat and of course cures faster so there is less wait until the next step.
I am a newbie and this is my first board build. I have finished my 7'4 egg shape (7'4x22x3) but a little confused about the amount of resin used. My glass schedule will be 6oz bottom/12oz bottom. is 48oz kit cutting it close. I am on a very tight budget. plus additive X. recommendation, please. JC
You can download and calculate how much resin to use when glassing a surfboard or SUP with our Resin Usage Chart : https://cdn.shopify.com/s/files/1/0689/1441/files/Surfboard_Glassing_Resin_Amounts_Per_Board_Length.pdf?7799691258253686780
I read that citrus based cleaners like Fast Orange are recommended for cleaning up this epoxy. I tried that product and haven’t had any luck. Any recommendations?
Citrus based cleaners like Fast Orange and Gojo work great for cleaning uncured epoxy. Mutliple washes are sometimes needed depending on what stage of cure the epoxy is in. You can also use Denatured Alcohol or vinegar to clean up epoxy.