Denatured Alcohol [DNA] Epoxy Surfboard Lamination Cleaner
Regular price $ 5.55
Denatured Alcohol [DNA] Epoxy Surfboard Lamination Cleaner
For the best epoxy sealcoat / hotcoat finish it is important to clean the fiberglass lamination of dust, dirt, oils, and particles prior to sealcoating with epoxy resin. A clean surface is key to avoid pinholes and fish eyes in the epoxy sealcoat / hotcoat. Any contamination on the board will mess with the surface tension of the epoxy and create an uneven surface.
Denatured Alcohol is an excellent choice to clean fiberglass because it evaporates very quickly and leaves no residue on the surface. You can quickly wipe down the board and start your sealcoat in minutes.
Pour 2 oz of denatured alcohol on the board before seal coating and wipe with a lint free cloth or Tee-shirt to remove contaminants.
DNA is also great for removing sticky tape or sticker residue on your surfboard.
Use approximately 2 oz. of DNA per side to clean top and bottom laminations.
SHIPPING NOTICE: Continental US and Canada shipping only. We cannot ship chemicals to Hawaii or Internationally. (But we're working on it!).
Reviews
Customer Reviews
QUESTIONS & ANSWERS
Ask a Question-
My Additive F is no longer liquid and mostly a solid. Is this normal?
In cold temparatures the Additive F tends to freeze and just needs to be heated up a little to re-liquify the wax solution. Good to go.
-
How much Additive F do I add to the epoxy?
Laminations:
Add 1 ml Add F for each ounce of HARDENER
So if you mix 8 oz Resin and 4 oz hardener (total 12 oz epoxy) then add 4 ml of Additive F
Hotcoats:
Add 2 ml Add F for each ounce of HARDENER
So if you mix 8 oz Resin and 4 oz hardener (total 12 oz epoxy) then add 8 ml of Additive F
You can measure the Additive F amount with a 1 oz graduated resin cup