Vented Leash Plug

New improved design!

• Micro-plug size (1" [25mm] diameter)
• Double sealed Gortex membrane
• Shielded, puncture proof membrane
• Pre or Post Glass install options
  

Greenlight's "VXV" Vented Leash Plug provides full time Gortex venting of your EPS and hollow wood boards without an extra part to install in your deck.

EPS boards contain very small air pockets between the foam beads which expand and contract with changing tempertures. If a board is dinged while surfing and water gets in, additional heat (leaving your board on the beach or in a hot car) will cause the water to change phase in to steam and exert pressure on the fiberglass skin - pushing the glass away from the foam (delamination).

The VXV is the slickest solution to relieving internal pressure in boards - both EPS and hollow wood boards.

The vent's screen size allows air (steam) out of the board to relieve internal pressure but will not allow water molecules in! No need to open and close the vent as needed in other surfboard venting systems. Just install and forget it...

Each vented leash plug includes an install kit and instructions

Available in Black, White, or Mahogany color

Pictured Below:

1# density EPS board

Balloon flanged and sealed to VXV

Filled with 16 oz. sea water and sealed. Digital thermometer installed

Locked in a car for 3 hours on a 95 degree F day

RESULTS

Internal board temperature = 127.5 degree F

Volume of steam vapor released through Greenlight's VXV = 1 cubic foot

Balloon diameter = 6 inches

Delaminations = ZERO